Privacy Mask; Block Areas From Being Viewed Or Recorded; Audio Settings - Bunker Hill Security 61624 Owner's Manual & Safety Instructions

Privacy Mask

Channel > Preview > Privacy

Block areas from being viewed or recorded

1. Enable: Select box.

Audio Settings

Channel > Audio
Note: Before configuring Audio, connect up to 4 audio
surveillance microphone(s) and speaker according to
B. Connect Cameras and Audio on page 9.
IMPORTANT: Only Audio 01 - 04 are
available, Audio 05 - 08 are not available.
NOTICE: CHECK FEDERAL, STATE AND
LOCAL AUDIO SURVEILLANCE LAWS
BEFORE INSTALLING MICROPHONE.
Item 61624 For technical questions, please call 1-888-866-5797.
2. Set: Click Set and follow on-screen instructions.
3. Repeat steps above for other channels as desired.
4. Copy: Copy settings from one
Channel to other Channels.
5. Default: Restore default settings.
6. Arrange Views: Follow on-screen instructions.
7. BlkSide: Click to set Horizon.
Click Apply to save changes and leave menu open.
Click OK to save changes and close menu.
Changes will not be saved if you click
Cancel or right click on screen.
1. Audio Compress: Select Open.
2. Audio Monitoring: Select Open.
3. Bind with Video: Match Audio Input with
Channel. (May change which Channel Audio
Input matches with instead of physically
changing Audio Input cables on back of DVR).
4. Copy: Copy settings from one
Channel to other Channels.
5. Volume: Adjust volume.
Click Apply to save changes and leave menu open.
Click OK to save changes and close menu.
Changes will not be saved if you click
Cancel or right click on screen.
Page 23