Table of Contents
Advertisement
Main User Settings
General > User
Set Password for Main User, Set Menu Logout
(To add additional users, go to User Management Settings on page 22)
Main User is named admin, name
cannot be changed.
1. User List: admin is selected by default. Click Edit.
2. Password: Enter Password, then click OK.
Note: To add other users, go to User
Management Settings on page 22.
Live View Settings
Channel > Preview > View Setting
Enter Channel Name, Select Channel Name Position, Select Channel Name Size, Hide Video (Covert)
1. Ch Name: Enter Channel name. For
example, "Driveway" or "Backyard".
Channel > Preview > Privacy Mask
This is an Advanced setting.
(Go to Privacy Mask on page 23.)
Item 61624
For technical questions, please call 1-888-866-5797.
NOTICE: If the wrong password is entered 3 times,
the DVR will sound an alarm. If this happens, remove
power plug from back of DVR, wait 15 seconds then
plug back in. If you are locked out of DVR because
of a password problem, call 1-888-866-5797.
3. Automatic Logout: Default is Wait 5 min. After 5
minutes of inactivity, menus will close and login will
be required to access menus again. To change:
a. Deselect Automatic Logout check
box to leave menus open.
b. Change wait time for menus to close.
Click Apply to save changes and leave menu open.
Click OK to save changes and close menu.
Changes will not be saved if you click
Cancel or right click on screen.
2. OSD Position: Select where
Channel Name will appear on monitor.
a. Bottom.
b. Top.
c. None: No name will appear.
3. OSD Size: Select size of Channel Name.
4. Hide Video (Covert): Click box to
hide live image on monitor.
Note: Camera will still record even if the
image can't be seen on monitor.
Click Apply to save changes and leave menu open.
Click OK to save changes and close menu.
Changes will not be saved if you click
Cancel or right click on screen.
Page 15
Hide quick links:
Advertisement
Table of Contents
