Step 2: Inserting And Charging The Battery - Sharp SL-5500 Startup Manual

00 Cover.book Page 6 Saturday, January 19, 2002 11:33 AM
6
Quick Start
Step 2
: Inserting and charging the battery
To insert the battery
Note: Only use the "EA-BL06" rechargeable battery (supplied).
1.
Slide the battery replacement
switch on the rear side of the unit
to the "REPLACE BATTERY"
position.
2.
Open the battery compartment lid
and gently pull it off.
3.
Insert the battery on the ribbon
tab, making sure that the triangle
( ), plus (+), and minus (-) marks
on the battery are aligned
correctly with those printed inside
the battery compartment.
4.
Replace the battery compartment
lid with the ribbon tab inside.
Caution: Be sure to replace the battery compartment lid after inserting the
battery.
If the cover is not on securely, the battery may become loose and
you may lose the data stored in the unit.
NORMAL OPERATION
REPLACE BATTERY
Ribbon
tab