Ericsson MINI-LINK 6351 Technical Description page 56

Technical Description
The Ethernet and PoE cables are connected to the injector using shielded
RJ45 connectors.
There are two versions of the injector: one for AC power supply and one for
DC power supply.
Power supply requirements for the AC version:
Input Voltage:
Input Current:
Frequency:
Power supply requirements for the DC version:
Input Voltage:
Input Current:
8.1.2 Power Over Ethernet Cable
One Ethernet cable can supply the packet radio with Ethernet payload, in-band
DCN, and DC-power. The cable has an angled, environmentally sealed, RJ45
connector on the end that is connected to the packet radio, and a standard
RJ45 on the other.
Figure 25
52
100 to 240 V AC
1A
50 to 60 Hz
30 to 60 V DC
1A
Power over Ethernet Cable
1/22102-HRA 901 17/9 Uen PU1 | 2016-07-04
17254