Av Connecting - Qomo Journey 13 series User Manual

2. AV Connecting

 AV IN
1) Connect an AV cable with the device with AV-OUT (Yellow is Video, Red is Audio-R, White is Audio-L).
2) Plug the POWER cord and switch it on from the rear panel.
3) Press to turn on the panel.
4) Select Signal source to AV IN source.
 YPbPr
1) Connect a YPbPr cable with the device with YPbPr.
2) Plug the POWER cord and switch it on from the rear panel.
3) Press to turn on the panel.
4) Select Signal source to YPbPr source.
11