Preparations For Use - REMS Power-Press Instruction Manual

Thrust REMS Ax-Press 25 22 V ACC
Thrust REMS Ax-Press 25 L 22 V ACC
Thrust REMS Ax-Press 30 22 V
Thrust REMS Akku-Ex-Press 22 V ACC
Thrust REMS Power-Ex-Press Q & E ACC
The specifi ed forces are nominal forces.
1.5. Electric Data
REMS Power-Press SE REMS Power-Press SE
REMS Power-Press REMS Power-Press
REMS Power-Press ACC REMS Power-Press ACC
REMS Power-Press XL ACC
REMS Power-Ex-Press Q & E ACC
REMS Mini-Press ACC
REMS Mini-Press 22 V ACC
REMS Mini-Press S 22 V ACC
REMS Ax-Press 25 22 V ACC / REMS Ax-Press 25 22 V ACC /
REMS Ax-Press 25 L 22 V ACC REMS Ax-Press 25 L 22 V ACC
REMS Ax-Press 30 22 V
REMS Akku-Ex-Press 22 V ACC
REMS Akku-Press, Akku-Press ACC
Rapid charger Li-Ion/Ni-Cd
(Plug-in battery,
Art. No. 571560)
Rapid charger Li-Ion
(Slide-in battery,
Art. No. 571575)
Voltage supply
230 V / 14.4 V
Voltage supply
230 V / 21.6 V
1.6. Dimensions
REMS Power-Press SE
REMS Power-Press, Power-Press ACC 370×235×85 mm (14.6"×9.2"×3.3")
REMS Power-Press XL ACC
REMS Mini-Press ACC
REMS Mini-Press 22 V ACC
REMS Mini-Press S 22 V ACC
REMS Akku-Press, Akku-Press ACC
REMS Ax-Press 25 22 V ACC
REMS Ax-Press 25 L 22 V ACC
REMS Ax-Press 30 22 V
REMS Akku-Ex-Press 22 V ACC
REMS Power-Ex-Press Q & E ACC
1.7. Weights
REMS Power-Press SE drive unit
REMS Power-Press / ACC drive unit
REMS Power-Press XL ACC
REMS Mini-Press ACC drive unit without battery
REMS Mini-Press 22 V ACC drive unit without battery
REMS Mini-Press S 22 V ACC drive unit without battery
REMS Akku-Press / ACC drive unit without battery
REMS Ax-Press 25 22 V ACC drive unit without battery
REMS Ax-Press 25 L 22 V ACC drive unit without battery
REMS Ax-Press 30 22 V drive unit without battery
REMS Akku-Ex-Press 22 V ACC drive unit without battery 22 V 22 V ACC drive unit without battery
without expander
Expander Cu (REMS Akku-Ex-Press 22 V ACC)
Expander P (REMS Akku-Ex-Press 22 V ACC)
Expander Q & E (REMS Akku-Ex-Press 22 V ACC)
REMS Power-Ex-Press Q & E ACC drive unit
REMS battery Li-Ion 14.4 V, 1.5 Ah
REMS battery Li-Ion 14.4 V, 3.0 Ah
REMS battery Li-Ion 21.6 V, 1.5 Ah
REMS battery Li-Ion 21.6 V, 2.5 Ah
Pressing tongs (average)
Pressing tongs Mini (average)
Pressing heads (pair, average)
Expanding head (average)
Adapter tongs Z2
230 V~; 50 – 60 Hz; 450 W; 1.8 A 230 V~; 50 – 60 Hz; 450 W; 1.8 A
110 V~; 50 – 60 Hz; 450 W 110 V~; 50 – 60 Hz; 450 W
S3 20% (AB 2/10 min) S3 20% (AB 2/10 min)
all-insulated, interference-suppressed all-insulated, interference-suppressed
14.4 V – ---; – 1.5 Ah – ---;
14.4 V – ---; – 3.0 Ah – ---;
21.6 V – ---; 1.5 Ah – – ---; 1.5 Ah
21.6 V
21.6 V – ---; 2.5 Ah – – ---; 2.5 Ah
21.6 V
14.4 V – ---; 3.0 Ah – – ---; 3.0 Ah
Input 230 V~; 50 – 60 Hz; 65 W
Output 10.8 – 18 V – ---
all-insulated, interference-suppressed
Input 110 V~; 50 – 60 Hz; 65 W
Output 10.8 – 18 V – ---
all-insulated, interference-suppressed
Input 230 V~; 50 – 60 Hz; 70 W
Output 10.8 – 21.6 V – ---
all-insulated, interference-suppressed
Input 110 V~; 50 – 60 Hz; 70 W
Output 10.8 – 21.6 V – ---
all-insulated, interference-suppressed
Input 230 V~; 50 – 60 Hz
Output 14.4 V – ---; 6 A – 33 A – – ---; 6 A – 33 A
all-insulated, interference-suppressed
Input 110 V~; 50 – 60 Hz
Output 14,4 V – ---; 6 A – 33 A – ---; 6 A – 33 A –
all-insulated, interference-suppressed
Input 230 V~; 50 – 60 Hz, 350 W
Output 216 V – ---; ≤ 15 A – – ---; ≤ 15 A
all-insulated, interference-suppressed
430×118×85 mm (16.9"×4.6"×3.3")
525×255×90 mm (20.7"×10.0"×3.5")
288×260×80 mm (11.3"×10.2"×3.1")
273×260×75 mm (10.7"×10.2"×3.0")
405×145×75 mm (15,9"×5,7"×3,0")
338×298×85 mm (13.3"×11.7"×3.3")
280×260×75 mm (11,0"×10,2"×3,0")
305×260×75 mm (12,0"×10,2"×3,0")
275×290×75 mm (10,8"×11,4"×3,0")
200×250×75 mm (7,9"×9,8"×3,0")
420×245×81 mm (16.5"×9.6"×3.2")
4.7 kg (10.4 lb)
4.7 kg (10.4 lb)
5.5 kg (12.1 lb)
2.1 kg
2.1 kg
2.2 kg
3.8 kg
2.6 kg
2.8 kg
4.2 kg
2.0 kg
0.3 kg
0.3 kg
0.3 kg
5.6 kg (12.2 lb)
0.3 kg
0.5 kg
0.4 kg
0.4 kg
1.8 kg
1.2 kg
0.3 kg
0.2 kg
2.0 kg
20 kN Adapter tongs Z4
13 kN Adapter tongs Z5
30 kN Adapter tongs Z6 XL
Pressing ring M54 (PR-3S)
20 kN
34 kN Pressing ring U75 (PR-3B)
1.8. Noise information
Emission at workplace
REMS Power-Press SE
REMS Power-Press / ACC / XL ACC L
REMS Mini-Press ACC / 22 V ACC /
S 22 V ACC
REMS Akku-Press /ACC
REMS Ax-Press 25 22 V ACC /
L 22 V ACC
REMS Ax-Press 30 22 V
REMS Akku-Ex-Press 22 V ACC
REMS Power-Ex-Press Q & E ACC L
1.9. Vibrations
Weighted effective value of acceleration
The specifi ed vibration emission value was measured according to a standard
test method and can be used for comparison with another power tool. The
specifi ed vibration emission value can also be used for an initial estimation of
the cut-out.
CAUTION CAUTION
The vibration emission value may differ from the specifi ed value during actual
use of the power tool depending on the manner in which the power tool is used.
Dependent upon the actual conditions of use (periodic duty) it may be necessary
to establish safety precautions for the protection of the operator.

2. Preparations for Use

CAUTION CAUTION
After the drive unit has been in storage for a long period of time, the overpres-
sure valve must be actuated fi rst by pressing the reset button (13) before putting
back into operation. If it is stuck or stiff, it may not be pressed. The drive unit
must be handed over to an authorized REMS customer service workshop for
inspection.
CAUTION CAUTION
Transport weights above 35 kg must be carried by at least 2 persons.
The respective latest sales literature applies for the use of REMS pressing
tongs, REMS Mini pressing tongs, REMS pressing rings with adapter tongs,
REMS pressing heads and REMS expanding heads for the different pipe
connection systems, see also www.rems.de → Downloads → Product Cata-
logues, Brochures. If the system manufacturer alters components of pipe
connection systems or markets new ones, their current application status must
be enquired about at REMS (Fax +49 7151 17 07 - 110 or e-mail info@rems.
de). Subject to change and error.
2.1. Electrical connection
WARNING
Note the mains voltage! Before connecting the drive unit or the rapid charger,
check whether the voltage given on the rating plate corresponds to the mains
voltage. On building sites, in a wet environment, indoors and outdoors or under
similar installation conditions, only operate the power tool on the mains with a
fault current protection switch (FI switch) which interrupts the power supply as
soon as the leakage current to earth exceeds 30 mA for 200 ms.
Rechargeable batteries
NOTICE
Always hold the battery 14.4 V (25) upright when inserting it in the drive unit
or the rapid charger. If inserted at an angle it can cause damage to the contacts
(4.5 lb)
and result in a short circuit which damages the battery.
(4.5 lb)
(4.9 lb)
Total discharging by undervoltage
(8.3 lb)
The Li-Ion batteries may not drop below a minimum voltage because otherwise
(5.6 lb)
the battery could be damaged by "total discharge". The cells of the REMS Li-Ion
(6.1 lb)
battery are delivered pre-charged to approx. 40 %. Therefore the Li-Ion batteries
(9.3 lb) must be charged before use and recharged regularly. Failure to observe this
regulation of the cell manufacturer can lead to damage to the Li-Ion battery by
total discharging.
(4,4 lb)
(0,7 lb)
Total discharging due to storage
(0,7 lb)
If a relatively low charged Li-Ion battery is stored, self discharging can lead to
(0,7 lb)
total discharge damage of the battery after longer storage. Li-Ion batteries must
therefore be charged before storing and recharged every six months at the
(0.6 lb)
latest and charged again before use.
(1.1 lb)
NOTICE
(0.9 lb)
(0.9 lb)
Charge the battery before use. Recharge Li-Ion batteries regularly to avoid
(3.9 lb)
their total discharge. The rechargeable battery will be damaged by total
(2.6 lb)
discharge.
(0.6 lb)
(0.4 lb)
(4.8 lb)
3.6 kg (7.8 lb)
3.8 kg (8.2 lb)
5.5 kg (12.1 lb)
3.1 kg (6.7 lb)
2.7 kg (5.9 lb)
L = 76 dB = 76 dB = 76 dB = 76 dB L L L L = 87 dB = 87 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
= 81 dB = 81 dB = 81 dB = 81 dB L = 92 dB L L L = 92 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
L = 73 dB = 73 dB = 73 dB = 73 dB L L L = 84 dB L = 84 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
L = 74 dB = 74 dB = 74 dB = 74 dB L = 85 dB L L L = 85 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
L = 73 dB = 73 dB = 73 dB = 73 dB L L L = 84 dB L = 84 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
L = 74 dB = 74 dB = 74 dB = 74 dB L L L L = 85 dB = 85 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
L = 73 dB = 73 dB = 73 dB = 73 dB L L L L = 84 dB = 84 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
= 81 dB = 81 dB = 81 dB = 81 dB L L L L = 92 dB = 92 dB K = 3 dB K = 3 dB
pA pA pA WA WA WA WA
< 2,5 m/s² K = 1,5 m/s²