Memory Program Entry; Setting Time And Power Level; Setting Magnification Factor - Sharp R-21JCA Operation Manual

Memory program entry

You can change memory programs for memory
banks. See time cooking on page 11.
R-21HT
Memory banks
Cooking stage
Memory NO.1 -10
Memory NO. 11-20 max. 2 stages
R-21HV/JV
Memory banks
Cooking stage
The R-21HV or R-21JV ovens can be programmed
only using 100% power. Follow steps 1,2,3 and 7
below.

Setting time and power level

* Suppose you want to set 4 minutes at 60% for the
1st stage and 2 minutes at 30% for the 2nd stage
for 1 serving in memory 1.(R-21HT)
Procedure
x 2
SET
1 Touch SET pad twice
within 2 sec.
1
2 Touch number pad.
SELECTATIME
4 0 0
3 Enter cooking time for
1st stage.
6
SELECTAPOWER
4 Enter power level in
1st stage.
SELECTATIME
2 0 0
5 Enter cooking time for
2nd stage.
3
SELECTAPOWER
6 Enter power level for
2nd stage.
x 2
SET
7 Touch SET pad twice.
20
max. 3 stages
10
1 stage
Display
NO.
NO.
Note: 1. (For R-21HT)
If you want to set memory 11-20, press
the desired number pad twice.
2. If the cooking time is over the maximum
time, the display will show "EE 9". See
page 11.
3. At step 1, no audible signal will be heard
when the SET pad is touched the first
time. An audible signal will sound when
the SET pad is touched the second time.

Setting magnification factor

Ovens are shipped with a magnification factor of 1.7
for DOUBLE QUANTITY.
You can change the magnification factor for double
quantity and have it stored in the memory.
* Suppose you want to set the magnification factor to
1.67 for double quantity in memory 1.
Procedure
x 2
SET
1 Touch SET pad twice
within 2 sec.
DOUBLE
QUANTITY
2 Touch DOUBLE
QUANTITY pad.
1
3 Touch number pad 1.
SELECTATIME
4 Touch SELECTATIME
pad.
1 6 7
5 Touch NUMBER pads
1,6 and 7.
x 2
SET
6 Touch SET pad twice.
Note: 1. In case you want to change the magnifica-
tion factor it must be set for each
separately.
2. The magnification factor can be set from
0.00 to 9.99.
3. At step 1, no audible signal will be heard
when the SET pad is touched the first time.
An audible signal will sound when the SET
pad is touched the second time.
9
Display
NO.
NO. X2
NO. X2
X2
X2
pad