Initiating A Selective Call - Motorola PM1500 User Manual

Conventional Radio Features

Initiating a Selective Call

To initiate a Selective Call, select a unit to call, then place the call.
1 Press the CALL softkey.
2 Select a unit in one of the following ways:
• From the ID number list:
– Do nothing if you want to call the unit ID currently
displayed.
OR
– Use the prestored list by turning the Mode knob to locate
the name/ID you want to call.
OR
– Enter, using the keypad on the keypad mic, the ID of the
desired unit.
Note: Using the keypad to enter the ID of another unit can only be
accomplished from the first display shown when CALL was
entered. If the list has been entered, scroll to the first display.
Press the numeric keys on the keypad mic to enter the digit
of the location number to access a preprogrammed call ID.
3 Press the microphone PTT button.
A telephone-type ringing sounds if the unit you are calling is in
service.
4 When the receiving unit answers, identify yourself and begin
your Selective Call.
5 To return to normal operation, press the HOME button.
Note: If you do not press the HOME button to hang up, your unit
will remain in the Selective Call state with the other unit. You
will miss all subfleet traffic.
34