Maintenance; After Use - Makita DCL142 Instruction Manual

Corner nozzle +Extension wand
(Straight pipe)
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
3
► 1. Cleaner body 2. Extension wand 3. Corner nozzle
Cleaning without nozzle
You can pick up powder and dust without nozzle.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off
before attempting to perform inspection or
maintenance.

After use

NOTE:
• Putting the cleaner against the wall without any
other support cause the cleaner to fall down and
be damaged.
1
2
10 ENGLISH
Cleaning
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/paper
pack mounting area and the dust stopper.
CAUTION:
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes small. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
NOTE:
• Paper pack is a throw-away type.
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.