Sharp PN-V601 Operation Manual page 14

Menu Items
nSCHEDULE
You can set the time to switch the monitor on and off.
Set this function with "SCHEDULE" in the OPTION menu. (See
page 11.)
SCHEDULE
XXXX/XX/XX XXX XX:XX:XX
(1) (2)
No. POWER
1 3 6 6 x 7 6 8
V: 60 Hz
1. Press or
press .
2. Set the SCHEDULE. (See the description below.)
Press or to select items, and press
change the setting.
MENU
3. Press .
SCHEDULE becomes effective.
(1)
●: SCHEDULE effective
-: SCHEDULE not effective
(2) POWER
ON : Switches the monitor on at the specified time.
OFF : Switches the monitor off at the specified time and puts
the monitor in standby mode.
(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.
ONLY ONCE:
Executes the SCHEDULE once on the specified day.
Specify the day of the week to execute the SCHEDULE.
EVERY WEEK:
Executes the SCHEDULE on the specified day of the week
every week. Specify the day of the week to execute the
SCHEDULE.
Periodic setting such as "Monday through Friday" is also
possible.
EVERY DAY:
Executes the SCHEDULE every day regardless of the day
of the week.
(4) TIME
Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis.
(5) INPUT
Specifies the input mode at power-on. When not specifying,
the screen at the previous power-off appears.
Input modes displayed on DVI, HDMI and BNC depend on
INPUT SELECT settings.
14
E
PC D-SUB
(3) (4)
DAY OF THE WEEK TIME
OK ... [MENU]
H: 47.7 kHz
to select the SCHEDULE number, and
Caution
• Do not switch off the main power after setting the
SCHEDULE.
• Specify the correct date and time. (See page 11.)
SCHEDULE does not function unless the date and time are
specified.
• Check regularly that the set date and time are correct.
(5) • When STANDBY MODE is LOW POWER, SCHEDULE
INPUT
cannot be set.
TIPS
• Up to 8 SCHEDULE items can be registered.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
• A SCHEDULE that has a large number has precedence
over that of a small number when schedules overlap.
or to