Input Label; Sleep Timer - Sharp LC 26D42UW Operation Manual

Useful adjustment settings

Input Label

Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Press INPUT to select the desired input
1
source.
Press MENU to display the MENU screen, and
2
then press c / d to select "Setup".
Press a / b to select "Input Label", and then
3
press ENTER.
Press a / b / c / d to select the new name for
4
the input mode, and then press ENTER.
Press MENU to exit.
5
• You cannot change labels if the INPUT SOURCE is TV.
Example

Sleep Timer

Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
1
• The remaining time displays when the sleep timer
has been set.
Each time you press SLEEP, the remaining
2
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
37