Setting The Clock; Dst Setting; Time Ajustment; Clock Setup - Sharp LC 26D42UW Operation Manual

Setting the Clock

DST Setting

Daylight Saving Time (DST) Adjustment
Press MENU to display the Menu screen, and
1
then press c/d to select "Setup".
Press a / b to select "Clock Setup", and then
2
press ENTER.
Setup
Press a / b to select "DST", and then press
3
ENTER.
Press c / d to select "On" or "Off".
4
Press MENU to exit.
5
• When "DST" is set to "On", the time entered is forwarded
by 1 hour.
• Please be sure to set "DST" before setting "Time
Adjustment".
Daylight Saving Time (DST) Adjustment
The Daylight Saving-Time changes as shown below.
Set the DST to "On" to forward the clock by 1 hour.
To rewind the clock by 1 hour, set the DST to "Off".
(Spring)
On the first Sunday in April DST starts.
(Autumn)
On the last Sunday in October DST finishes.
Option
Time Adjustment
Current time Adjustment
Press MENU to display the Menu screen, and
1
then press c / d to select "Setup".
Press a / b to select "Clock Setup", and then
2
press ENTER.
Setup
Press a / b to select "Time Adjustment", and
3
press ENTER.
Press a / b and c / d to set the time and
4
press ENTER.
Backup
The clock function is maintained for about 5 minutes
even when the AC cord has been shut off due to a
power outage or when moving the LCD TV set. (Since
about 30 minutes are required to charge the backup
power supply, it may not be possible to maintain the
clock function if the charging time is excessively short.) If
the clock setting has been reset, repeat the procedures
on this page.
Option
21