Wiring - Becker Centronic VarioControl VC360-II Assembly And Operating Instructions Manual

Connect the radio receiver as follows:
Ensure that there is optimum radio reception.
Check the direction of rotation of the tubular drive. Should
the direction of rotation be incorrect, swap connecting wires
BK (3) and RD (4) on the tubular drive.
The charging voltage indicator lamp lights up as soon as the
solar cell is connected.
Connecting the plug-in power supply (optional)
The 12 V plug is optionally available.
28 - en

Wiring

BU
BN
BK
RD
BU( ) 1
BN( ) 2
BK( ) 3
RD( ) 4
BU (1)
Yellow
BN (2)
BU (1)
BN (2)
Blue
BU( ) 1
BN( ) 2
BK( ) 3
RD( ) 4