Sharp LB-1085 Operation Manual page 11

QUICK REFERENCE
When transporting the LCD Monitor
Transporting the LCD Monitor requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves.
Before turning on the LCD Monitor
1 Connect the AC plug for the LCD Monitor into
the AC outlet.
•
Be sure to turn OFF the main
of the LCD Monitor when connecting the cord.
Fix the AC cord as shown below.
AC outlet
•
Place the LCD Monitor close to the AC outlet, and
keep the power plug within reach.
• Do not use an AC cord other than the one supplied
with the monitor.
•
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
• It is recommended to prepare a dedicated power
line for the LCD Monitor.
2
POWER on the rear
1
3
2
3
4
•
Push and turn ON the main POWER on the
rear of the LCD Monitor.
Press POWER on the side of the LCD Monitor.
The POWER indicator on the front of the LCD
Monitor lights BLUE.
POWER indicator
LCD Monitor angle cannot be adjusted.
Main
POWER
POWER
9