Table of Contents
Advertisement
2.0 P
D
RODUCT
IMENSIONS
CRMA 16/30/32
3.0 C
I
ORDREEL
NSTALATION
3.1 Before You Start the Installation
The most important part of your installation is planning the best layout for the shore power cable routing from
the unit to where it exits the boat (normally through a Hawse Pipe). Be sure that cable is routing a straight path, free
from any obstacles. If the cable exit is not in line with the center of the reel, it is very possible the cable will wrap on
the side of the reel closest to the exit and could bind during retraction. There are some accessories you can purchase
to help if there is no way to center the exit to the Cordreel. (See section 7 for accessories.) Also make sure that
Cordreel is installed in a place where it is protected from the environment.
2
Advertisement
Table of Contents
