Flex FHE 2-22 SDS-plus Original Operating Instructions page 11

FHE 2-22
Contents
Symbols used in this manual . . . . . . . . 11
Technical specifications . . . . . . . . . . . . 11
Overview . . . . . . . . . . . . . . . . . . . . . . . . 12
For your safety . . . . . . . . . . . . . . . . . . . 13
Noise and vibration . . . . . . . . . . . . . . . . 14
Instructions for use . . . . . . . . . . . . . . . . 15
Maintenance and care . . . . . . . . . . . . . . 15
Disposal information . . . . . . . . . . . . . . . 17
-Declaration of Conformity . . . . . . . . 18
Exemption from liability . . . . . . . . . . . . . 18
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE!
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 18)!
Technical specifications
Hammer drill
Rated power
No-load speed
No-load impact rate
Max. single impact energy
(according to "EPTA-
procedure 05/2009")
Tool holder
Max. drill diameter
- Concrete
- Wood
- Metal
Weight according to
"EPTA Procedure 01/2003"
FHE 2-22
SDS-plus
W 710
min 0-1400
-1
min 0-4300
-1
J 2.1
SDS-plus
mm 22
mm 30
mm 13
kg 2.3
11