Advertisement
Table of Contents
RAM No-Drill
Seat Bases
Item Number
TM
RAM-VB-112
National Products, Inc.
Vehicle base for the
FORD EXPLORER (2002-NEWER)
FORD EXPLORER SPORT TRAC (2007)
MERCURY MOUNTAINEER (2002-NEWER)
SPECIFICATIONS
Placement
Passenger side on the floor, in front of seat
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
A = 13", B = 3.63", C = 8.25", D = 17", Hole
RAM-VB-112-SW1
Center = 11.25
Pole or Pedestal
Purchased Separately
Weight
9.1 lbs.
Features
Installs in minutes with no drilling required.
Misc.
The RAM-VB-112 will not fit in the Ford Explorer Sport 2-Door.
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
Advertisement
Table of Contents
Related Manuals for Ram Mounts No-Drill RAM-VB-112
Summary of Contents for Ram Mounts No-Drill RAM-VB-112
- Page 1 RAM No-Drill Seat Bases Item Number RAM-VB-112 National Products, Inc. Vehicle base for the FORD EXPLORER (2002-NEWER) FORD EXPLORER SPORT TRAC (2007) MERCURY MOUNTAINEER (2002-NEWER) SPECIFICATIONS Placement Passenger side on the floor, in front of seat Drilling Required No - uses existing seat bolts Seat Configuration Bucket Construction/Finish...
- Page 2 RAM No-Drill Seat Bases Item Number RAM-VB-112 National Products, Inc. Vehicle base for the FORD EXPLORER (2002-NEWER) FORD EXPLORER SPORT TRAC (2007) MERCURY MOUNTAINEER (2002-NEWER) INSTALLATION INSTRUCTIONS If installing this base with a RAM tele-pole™ assembly, attach the lower female pole prior to installing the No-Drill™ base.
Need help?
Do you have a question about the No-Drill RAM-VB-112 and is the answer not in the manual?
Questions and answers