Available Models - ZKaccess SmartLPR Access Installation Manual

SmartLPR ® Access User Manual
4. Pre-arming loop: SmartLPR
beginning of the lane a signal indicating the recognition must start. When the client application
sends a recognition request, SmartLPR
the recognition process has started.
Installation scenarios: this mode is exclusively designed for rear plate captures. This
●
mode adapts a client application that works in software mode, normally
capturing front license plates, to a LPR system that reads rear license plates.
(see section 2.2. Rear plate captureto know more about this type of installation).
1.4.

Available models

There are various SmartLPR
available models can be classified according to the following criteria:
1.4.1. Housing type or format
Painted cabinet: cupboard-like housing to be vertically fixed on the floor.
●
Stainless steel cabinet: cupboard-like housing to be vertically fixed on the floor. Made
●
of high quality stainless steel.
Quercus Technologies
® Access directly receives from a loop installed at the
® Access sends the best recognition result obtained since
® Access models that can adapt to different project demands. The
Basic concepts
10