Short Barcode - Inateck BCST-33 User Manual

4.8. Short Barcode

Short barcode, which refers to barcodes that equals to or is less than two characters,
such as the ITF25, IATA25, Standard 25, Matrix 25, Code 11, MSI, China postal code,
Code39 and Codabar, is supported by Inateck BCST-33. Though disabling the reading
of short barcode is taken as default as it would increase the anti-jamming capability
of Inateck BCST-33 and prevent error scanning from happening. However, the
following setting steps are suggested if unreadable short barcode occurs.
Enable Short Barcode
(*) Disable Short Barcode
Steps to enable the short barcode are as below:
1. Scan "Enter setup" Barcode;
2. Scan "Enable short Barcode" Barcode;
3. Scan "Exit with Save" Barcode.
Enter Setup
Exit with Save
Exit without Save
62