Code; Enable/Disable Code; Start/Stop Transmission - Inateck BCST-33 User Manual

3.4. Code 39

3.4.1. Enable/Disable Code 39

Decide whether to enable Code 39. Inateck BCST-33 Scanner defaults "Enable Code
39".
(*)Enable Code 39
Disable Code 39

3.4.2. Start/Stop Transmission

Decide whether to include the Start/Stop characters in the data being transmitted
through selecting correspondent barcode below. Inateck BCST-33 takes disabling
transmitting Code39 Start/ Stop Characters as default.
Transmit Code 39 Start/Stop Characters
(*)Do not Transmit Code 39 Start/Stop
Characters
For example: Steps to not transmit code 39 Start/Stop Characters are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 39" barcode; (If Code 39 is disabled, it is needed to enable
it);
3. Read the "Do Not Transmit Code 39 Start/Stop Characters" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
30