Table of Contents
Advertisement
Checking the status of the current job
The display normally shows the date and time and prompts related to
operations you are performing. To check and see what number the fax
machine is currently calling or transmitting to, or what number the fax machine
is currently receiving a document from (if this information is available), press
JOB STATUS
. Information on the current job will appear in the display. To switch
back to the date and time display, press
To cancel a fax transmission or reception
To cancel a fax transmission or reception that is currently in progress, press
JOB STATUS
so that the status of the transmission or reception appears in the
display, and then press
Checking and canceling stored transmission jobs
To display information on jobs that are waiting in memory for transmission,
follow the steps below. You can also cancel a transmission job with this
procedure.
1
MEM.STATUS
Press
(flip up the Rapid Key
B
overlay) and then
2
Press
or
to scroll through the list of transmission jobs. The name
(or number) of each receiving party will appear in the display, together
with the 3-digit memory number assigned to the transmission.
To cancel a transmission, press
transmission appears in the display.
Sending a Fax by Automatic Dialing
JOB STATUS
STOP
.
Display:
2
.
and then
DEL
again.
TX STATUS
PRESS
OR
The number of
stored transmission
jobs appears here
START/
while the
ENTER
(005)
47
Advertisement
Table of Contents
