Table of Contents
Advertisement
NO CONF. FUNCTION
NO PAPER
ONHOOK DIAL MODE
OUTPUT TRAY OFF
PAPER JAM
RCVD CONF. FAX
REMOVE ORIGINAL(S)
SIZE ERROR
REPLACE TONER
WAITING<MEMORY FULL>
Confidential transmission was cancelled because
the receiving machine does not have a
confidential function, a confidential passcode is
not programmed in it, its memory is full, or it is not
a Sharp model.
This message will be followed by one of the paper
sources in parentheses, and informs you that the
paper source is out of paper. If no paper source is
indicated, both paper sources are out of paper.
The SPEAKER key has been pressed and the fax
machine is waiting for you to dial.
The received document tray is not attached.
Attach it as explained in Connections in Chapter 1
(the tray must be attached for the fax machine to
operate properly.)
The printing paper is jammed. See the following
section, Clearing Paper Jams .
A confidential fax has been received in memory.
Print the fax as explained in Confidential
Operations in Chapter 5.
The original document is jammed. See the
following section, Clearing Paper Jams .
This message will be followed by one of the paper
sources in parentheses, and informs you that the
paper loaded in that source is not all the same
size.
The toner cartridge must be replaced.
The memory has become full and scanning has
stopped during scanning of a multi-page
document. Scanning will automatically resume
when sufficient memory becomes free (for
example, after several pages are transmitted).
Messages and Signals
127
Advertisement
Table of Contents
