Table of Contents
Advertisement
Custom CPU Core Ratio
This item allows you to set a custom CPU core ratio. The CPU core ratio is calculated with
the formula: 2 * FID / DID.
Configuration options: [Auto] [Manual]
The following items appear only when you set the Custom CPU Core Ratio to [Manual].
FID
This item allows you to set the core frequency multiplier. Use the <+> or <-> to adjust
the value.
DID
This item allows you to set the core frequency divisor. Use the <+> or <-> to adjust the
value.
Memory Frequency
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [Auto] [DDR4-1333MHz] - [DDR4-4200MHz]
TPU
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance.
[Keep Current Settings]
[TPU I]
[TPU II]
Ensure to use water cooling device before selecting [TPU II].
3.6
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
3.6.1
AMD fTPM configuration
The items in this menu show the AMD fTPM configuration options.
Firmware TPM
This item allows you to enable or disable AMD CPU fTPM.
Configuration options: [Enable] [Disable]
When Firmware TPM is set to disabled all saved data on it will be lost.
3-14
Keep the current settings without changing anything.
Applies air cooling overclocking conditions.
Applies water cooling overclocking conditions.
Chapter 3: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
