Internal Connectors - Asus ROG Strix X470-I Gaming Manual

1.1.8

Internal connectors

1. AMD Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-4)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10
configuration through the onboard AMD
• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID].
• Before creating a RAID set, refer to the RAID Configuration Guide. You can
download the RAID Configuration Guide from the ASUS website.
ROG STRIX X470-I GAMING
X470 chipset.
®
1-11