Table of Contents
Advertisement
7) With the Insert Retainer Plate removed, you have ready access to make
whatever changes you see fit. Switch coin inserts with blanks, or switch blank
inserts for coins. When finished, it is important that the Insert retainer Plate is
attached snugly so the unit will move freely and not catch on the plate or
screws. Once the Insert Retainer Plate and Spring Bracket are snugly
attached, reconnect the return springs, and test that the handle moves
smoothly. If you've installed blanks, just give it a push. If you've set your
Push Chute for coin use, you'll need the correct coins so it will work.
6) Remove the Phillips screw or
screws holding the insert retainer
plate and you will have access to all
the inserts.
Part# 850200130
44
Hide quick links:
Advertisement
Table of Contents
