Valley Panther ZD-X Service Manual And Instructions page 36

How to Copy Settings from the Table to the USB Memory Stick
 Once you have table set up the way you want to, insert a blank memory
stick into the USB port ( J9 ) of your Panther ZD-X™ control board. Press the
S1 / RST button on the middle of the board.
 After a few moments, the display of your Panther ZD-X™ table will show the
version number of the table, and then will display a message stating.
 SAVED TO USB
 After a few seconds you will then see the following message
 LEAGUE SAVED TO USB
 Once you see this message you can remove the USB memory stick.
 There will be a file on the USB stick called TABLE.CSV.
Now that you have TABLE.CSV on the USB memory stick, you can
clone the settings to other tables on your route by following the
steps listed under USB UPDATING on page 22 in Master Group
section.
TABLE.CSV
All of this information is saved into a file on your table called TABLE.CSV. CSV
stands for comma separated value. CSV files can be edited in Microsoft Excel,
Apple Numbers, or simple text editing programs. You can open this file and edit
it on your PC.
Please be careful when editing the file. Excel, Numbers and other programs will
only know that there are numbers in the blanks, but are totally unable to
understand if your Panther ZD-X will understand the numbers.
Part# 850200130
36