Valley Panther ZD-X Service Manual And Instructions page 43

Part# 850200130
.
3) After pushing in the chute and
your coins drop out, you will be
able to access the inserts, and a
section that may contain spare
inserts. Continue to hold the
handle in as shown...
4) and unhook the two large
return springs from the small
hooks on the spring bracket.
5) you can remove the single
Phillips screw holding the spring
bracket to access the spare inserts
(if any). This will also be a very
good place to store any inserts you
remove during this process so you
will easily be able to find them for
future adjustments, and aren't
having to dig in your workbench,
toolbox, desk drawer, etc.. BE SURE
TO RETIGHTEN THIS SCREW ONCE
YOU ARE DONE, if it is sticking up
just a little the unit will not move
freely. No need to use Olympic-
caliber strength, just make sure it is
snug. Now turn the unit over.
43