Valley Panther ZD-X Service Manual And Instructions page 42

The Valley Panther ZD-X
The Panther ZD-X is equipped with a push chute so that if the battery protection measures
and reminders to keep the battery charged all still result in a dead battery, your Panther
ZD-X still has a way to be used. Setting the dollar value of your table is not fully complete
unless you set the push chute to match.
1) Remove the Push Chute from the
coin door, and remove the push
chute end, proximity plate,
anything bolted to the end— for
easier access. You will need the
Push Chute (of course), enough
coins to make it work in its current
setting, the inserts for the desired
setting, and a Phillips screwdriver.
ESD Push Chute
2) To gain access to the inserts, put
your coins into the correct slots and
then push in the handle.
Part# 850200130
42