Fluke TiX640 User Manual page 35

 Caution
Follow the specified steps on how to
establish the required connections.
1. Connect the thermography camera to the breakout
box. For this, the 14-pin connecting cable of the
breakout box must be used. It is connected to the
right-hand side 14-pin LEMO socket on the backside
of the thermal imager.
2
1
6
Shop for Fluke products online at:
2. Connect the breakout box to the COM interface of
the host computer with a commercially available
cable.
3. Connect the supplied ac adapter to the breakout box.
4. Push the Power button
camera to turn on the thermography system.
Table 1-8. Breakout Box
Item
3





5 4

hvh061.eps
MyFlukeStore
www.
Before You Start
on the backside of the

Description
Connecting cable for thermal imager
14-pin LEMO socket for ac adapter
Terminal strip
Trigger T1, T2 (configurable)
BNC video port (PAL/NTSC-FBAS)
Serial interface (RS232)
1.888.610.7664
.com
1
Set-Up
1-29