Recording For Dvd Discs; Before Recording; Recordable Discs; About The Recording Format - Sharp DV-RW2U Operation Manual

Recording for DVD Discs

TIMER DISC OPEN/
POWER
ON/OFF TIMER CLOSE
CH
ANGLE AUDIO
SETUP/
DNR ZOOM INPUT
FUNCTION
TITLE MENU
SET/
RETURN ENTER
VCR PLUS +
TIMER PROG.
REC MODE
AM/PM ERASE PROGRAM
100
REV FWD
PLAY
REC
STILL/PAUSE
STOP
SKIP F.ADV
SEARCH SKIP SLOW
ON
ORIGINAL/
DISPLAY SCREEN EDIT
PLAY LIST
POWER INPUT VOL
CH
TV CONTROL
46
DV_RW2U#p45-53.p65

Before Recording

Recordable Discs

DVD-RW Discs
• DVD-RW discs make it possible to
repeatedly make about 1,000 recordings of
high-quality sound and pictures attainable.
• There are two types of DVD-RW discs
consisting of Ver. 1.1 and Ver. 1.1 (CPRM).
These discs can be recorded while
selecting the preferred mode from two
different recording formats (VR mode or
Video mode).
DVD-R Discs
4.7
• DVD-R discs are able to record the high
quality pictures only once.
• DVD-R discs can only be recorded in the
Video mode.
NOTE
• When using DVD-RW discs in the Video
mode, record these discs after first
initializing the disc in the Video mode. For
further details, read the section on "VIDEO
MODE INITIALIZE" (page 88) of Disc
Setup.
• When recording onto DVD-RW or DVD-R
discs, it takes a while until recording
begins (about 2 seconds for DVD-RW discs
and about 10 seconds for DVD-R discs).
Make sure to press ÆREC earlier when
recording onto DVD-RW or DVD-R discs.
About the Recording
Format
VR mode:
When you want to edit
recorded material
Video mode:
When you want to enjoy
recorded material with
another DVD player
(playback with all DVD
players is not guaranteed)
• DVD-RW discs that have been
recorded in the VR mode can
be played back with DVD
recorders indicated as being
"RW COMPATIBLE".
46
NOTE
• Recorded materials must be finalized
(page 88) in order to be viewed with
another DVD player.
• Materials recorded in the VR mode and the
Video mode cannot be contained on the
same disc.
Before Starting
Recording
• Refer to "About Recording" on page 9 for
information on recording.
NOTE
DVD recorders perform high-precision
recording. Pay attention to the following
matters so that data is recorded accurately
on the disc.
• Do not subject the recorder to impacts.
• Do not use the recorder in unstable
locations or locations subject to vibrations.
• Do not unplug the recorder during
recording, writing of data, editing,
initialization, finalizing or any other
occasions when the recorder is operating.
Unplug the recorder only after turning the
power "OFF". Furthermore, the
manufacturer is not responsible for
compensation for the contents of data in
the case data has been lost or was not
recorded.
• Titles for which recording has been
interrupted due to a scratched disc, soiled
disc or other reason are displayed with an
exclamation point "!" in front of the title
displayed on the DiscNavi menu and so
forth.
* CD-R and CD-RW discs cannot be
recorded with this recorder.

Initialization

DVD-RW discs must be initialized (formatted)
before using for recording. (Since DVD-R
discs are not required to be initialized, they
can immediately be recorded in the Video
mode.)
Initializing in the VR Mode
When an unused disc is loaded onto the
recorder, it is automatically initialized in the
VR mode.
03.1.9, 7:38 PM