Catv Or Satellite Receiver Connections; Connecting To A Cable Box Or Satellite Receiver (1) - Sharp DV-RW2U Operation Manual

CATV or Satellite Receiver Connections

Connecting to a Cable Box or Satellite Receiver (1)

The following connection is the connection to a cable box or satellite receiver
when receiving only a few scrambled channels. When many or all the channels
are scrambled, see the connection on the next page.
Using this connection, you can:
• Record unscrambled CATV signals by selecting them on this recorder.
• Record scrambled CATV signals by selecting them on the cable box or satellite
receiver and using AV AUTO REC function (See page 60).
• Record another channel while you watch one channel.
TV
To VIDEO/AUDIO
input jacks
Video/Audio
cable
(Supplied)
2
To antenna
Cable box/
Satellite receiver
VIDEO/AUDIO
output jacks
Video/Audio cable
(Commercially available)
IN 1 (AUTO REC)
VIDEO/AUDIO jacks
The Recorder
To VIDEO/AUDIO
output jacks
DV_RW2U#p19-23.p65
Coaxial cable
(Commercially available)
input jack
1
To antenna
output jack
3 1
COMPONENT
LINE R-AUDIO-L VIDEO S-VIDEO
IN 1
Y
AUTO
OUT
DIGITAL OUT
P
IN 3 B
REC
(480I/480P)
OPTICAL
OUT P
R
To Antenna/CATV
wall outlet
21
1
• The input signal to IN FROM
2
3
To antenna
input jack
• This is a standard video connec-
Coaxial cable
(Supplied)
To OUT TO To OUT TO
TV TV
• Connect this recorder directly to
IN FROM
ANTENNA
VHF/UHF/CATV
• When using this connection, set
OUT TO TV
To IN FROM
ANTENNA
After the Conneciton
1
Plug in the power cords of the TV and
Antenna cable
cable box/satellite receiver. Then go to
"EZ Set Up" (see page 23).
03.1.14, 11:29 AM
Connect the TV antenna
and coaxial cables as
shown on the left.
You can watch and record the TV
channels.
NOTE
ANTENNA jack is passed through to
the OUT TO TV jack.
Connect the VIDEO/AUDIO
output jacks on this
recorder to the VIDEO/
AUDIO input jacks on your
TV using a Video/Audio
cable.
You can watch discs.
Connect the VIDEO/AUDIO
IN 1 jacks on this recorder
to the VIDEO/AUDIO output
jacks on your cable box or
satellite receiver using a
Video/Audio cable.
You can record scrambled CATV
channels when using a cable box
or satellite receiver for decoding.
NOTE
tions. You can use S-Video or
component connections if they are
available.
Important!
your TV and not via the VCR, cable
box or satellite receiver.
"PROGRESSIVE" in "PLAYBACK
SETUP" to "OFF". (When the
setting is "ON", the disc playback
picture cannot be viewed.)
21