Sharp SF-1020 Service Manual page 55

2
Remove the operation panel, the upper cabinet R, and the right
cabinet.
3
Remove the dark box cover upper.
4
Manually move mirror base B. (Within the range where the wire
fixing plate fixing screw can be removed.)
5
Remove the wire fixing plate in the front/rear frame side of the
copy lamp unit, and remove the wire from the side plates F/R.
6
Remove the harness from the copy lamp unit.
7
Rotate the copy lamp unit counterclockwise to remove.
5
6
B. Mirror base wire removal
1
Remove the upper cabinet L, and the left cabinet.
2
Remove the mirror wire spring from the groove on the left side of
the optical base plate.
3
Remove the mirror base wire from the winding pulley.
(Remove he wire fixing screw.)
C. No. 2/3 mirror unit (mirror base B) removal
1
Move the mirror base B to the center between the positioning and
the optical base plate left surface.
2
Lift the front side of mirror base B and separate it from the rail.
(The front side only)
6 – 8