Lenovo System x3850 X6 Installation Manual page 30

Ibm to lenovo upgrade
Hide thumbs Also See for System x3850 X6:
Table of Contents

Advertisement

Step 8.
Make sure that all adapters from the IBM server have been transferred to the upgraded Lenovo
server and that all cables to the server are reconnected.
Update firmware and device drivers for installed components
After performing the physical conversion and updating server firmware, the service technician must also
update the firmware and device drivers for all components installed in the server to their Lenovo versions.
Lenovo firmware and device drivers for installed components are available at
datacentersupport.lenovo.com/
to perform the update.
Verification
After the ITL server upgrade is complete, the service technician must complete the following steps to verify
operation of the Lenovo server:
1. Make sure that the server powers up and passes UEFI initialization (see
Lenovo System x3850 X6 and x3950 X6 Type 6241 Installation and Service Guide
in the Lenovo System x3850 X6 and x3950 X6 Type 6241 Installation and Service Guide
2. Make sure that you are able to access the IMM (see
Lenovo System x3850 X6 and x3950 X6 Type 6241 Installation and Service Guide
3. Verify that all server vital product data (VPD) is correct (see the Integrated Management Module II User's
Guide at http://systemx.lenovofiles.com/help/topic/com.lenovo.sysx.imm2.doc/printable_doc.html).
4. Make sure that all server firmware is updated to the latest level (see
System x3850 X6 and x3950 X6 Type 6241 Installation and Service Guide
5. Make sure that there are no errors messages (see
x3950 X6 Type 6241 Installation and Service Guide
If problems are encountered following the ITL upgrade, troubleshoot the system using standard methods
(see
"Start here" in the Lenovo System x3850 X6 and x3950 X6 Type 6241 Installation and Service Guide
26
System x3850 X6 and x3950 X6 IBM to Lenovo Upgrade Installation Guide
. See the documentation for each device for additional information about how
).
http://
"Turning on the server" in the
"Using the integrated management module" in the
"Updating the firmware" in the Lenovo
).
"Error messages" in the Lenovo System x3850 X6 and
and
"Using the Setup utility"
).
).
). If you

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x3950 x6

Table of Contents