Dometic MCS T12 Installation Manual page 23

MCS T6, MCS T12, MCS T16
8.9 Remote Air Sensor Installation (optional)
Install the optional remote air sensor if the display cannot be mounted in a proper
location for accurately sensing room temperature. Installing the remote sensor
overrides the display's built-in sensor. The standard cable length for the remote
air sensor is 5 ft (1.5 m).
➤ Mount the remote air sensor (fig. 8 4, page 6) in the plastic clip mounted
on the return air side of the evaporator.
➤ Plug the cable (6-pin connector) into the ALT AIR socket (J3)of the circuit
board (fig. 0 5, page 8).
EN
Installation
23