Table of Contents
Advertisement
Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
Using Sleep timer on the menu screen
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
Press a / b to select "Sleep timer", and then
4
press ENTER.
Press a/b to select "Change", and then
5
press ENTER.
Press a / b to select the desired item, and
6
then press ENTER.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
ECO picture control
This function automatically detects the image source
and decreases the power consumption while keeping
the brightness of the image unchanged.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
• ECO menu displays.
Press a / b to select "ECO picture control".
4
Press c / d to select "On" or "Off".
5
NOTE
• This function does not work when "AV mode" is set to
"DYNAMIC (Fixed)" or "Auto".
• This function is greyed out in 3D mode.
Energy save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "ECO".
3
• ECO menu displays.
Press a / b to select "Energy save", and then
4
press ENTER.
Press a / b to select "Standard" or
5
"Advanced", and then press ENTER.
Selected item
Reduces the backlight brightness.
Standard
Reduces the backlight brightness more
Advanced
than "Standard".
Off
The backlight brightness is the same
value of your settings in the selected "AV
mode ".
NOTE
• You can also go to "Energy save" mode by pressing ECO.
• This function does not work when "3D brightness boost"
is set to "High" or "Low".
Description
33
Advertisement
Chapters
Table of Contents
Troubleshooting
