Table of Contents
Advertisement
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
The message "A MISFEED HAS OCCURRED. CLEAR
INDICATED AREA. PRESS
INSTRUCTIONS." will appear with a display of paper
misfeed locations. Press the INFORMATION (
for more detailed information as necessary.
(
P. 5-6)
(
P. 5-8)
(
P. 5-11)
(
P. 5-10, 5-11)
A MISFEED HAS OCCURRED.
CHECK THE INDICATED AREA AND REMOVE
THE MISFEED ORIGINAL.
CLEAR INDICATED AREA.
PRESS
FOR RECOVERY INSTRUCTIONS.
A
B
5-2
If paper becomes accidentally torn during removal, be
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
FOR RECOVERY
) key
First confirm the misfeed locations.
For misfeeds in optional equipment, see their respective
sections. (pages 7-14, 7-21, and 7-25)
(
P. 5-2)
Misfeed in the RSPF
When the RSPF misfeeds an original sheet, the copier will stop and the
misfeed message will appear.
The misfeed message display varies with the misfed area.
An original misfeed may occur at one of two locations:
(A) in the RSPF feed section or (B) in the exit section.
(
P. 5-5)
(
P. 5-5)
Advertisement
Table of Contents
