Table of Contents
Advertisement
Category
Program Name
Date Format
Setting
Date and Time
Adjustment
Rotation Copy
Setting
Size Setting for
[EXTRA]
Heavy Paper on
the Bypass Tray
Timer Settings
Auto Power
Shut-off Timer
Auto Clear Setting
Preheat Mode
Setting
Noise Level
Reduce Mode
Message Time
Setting
Enable/Disable
Disabling of Auto
Settings
Paper Selection
Disabling of Auto
Tray Switching
Disabling of
Bypass-Tray
in Duplex Copy
Disabling
Deletion of Job
Programs
Disabling of
Document Feeder
Disabling of Duplex
Copying
KEY OPERATOR PROGRAMS
Function
Sets the initial date format.
Adjusts the date and time.
Enables/disables rotation of original images.
Sets a paper size in each tray with [EXTRA] setting.
Enables/disables selection of paper type placed in
the bypass tray.
Sets a time interval after which the copier
automatically turns off.
Sets a time interval after which the copier returns
to the initial settings.
Sets the time that elapses before the copier enters
the preheat mode after copying is completed.
Sets the time that elapses before the copier enters the 8-24
noise level reduce mode after copying is completed.
Sets the length of time that messages are displayed.
Prevents automatic paper selection. To disable auto
paper selection from the bypass tray, see page 8-28,
Prohibit Auto Paper Selection from the Bypass-Tray.
Prevents automatic switching between the paper
trays.
Prohibits the use of the bypass tray during
duplex copying.
Prevents stored programs from being replaced or
deleted.
Prevents the use of the document feeder when it
malfunctions.
Temporarily prevents the duplex system from
operating when it malfunctions. Allows the use of the
copier but not the duplex system.
Page No.
8-20
8-21
8-21
8-22
8-22
8-23
8-23
8-24
8-25
8-26
8-26
8-26
8-27
8-27
8-27
8-5
Advertisement
Table of Contents
