Table of Contents
Advertisement
O
A4
URE
PAPER SELECT
1
2
3
4
5
6
7
8
9
AUDIT CLEAR
PROGRAM
0
P
INTERRUPT
CLEAR ALL
CA
START
CLEAR
C
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
A4
EXPOSURE
PAPER SELECT
Check the copy paper selection.
7
When the desired paper size is not selected, touch the desired
AUT
paper tray on the touch panel then the AUTO IMAGE key. This
lets the copier automatically set the best reduction or enlargement
7
ratio and display it on the touch panel, judging from the placed
COP
original size and the desired paper size.
(See steps 2 and 3 of page 2-11.)
Enter the desired number of copies.
8
INTERRUPT
CLEAR
C
Press the START (
9
If the document feeder is used, copying will start after all originals
are scanned.
If the document glass is used, proceed to the next step.
Replace the finished original with the next original after
10
the START (
the START (
READ-END
have been scanned. Then, press the "READ-END" key
AUTO IMAGE
on the touch panel.
100%
Copying will start at this time.
COPY RATIO
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
If originals of different sizes are used, the copy paper size will be
determined based on the original that is scanned first. If originals
larger than the first original are used, a portion of the images may
not be copied.
You can make a pamphlet by folding the copies in two and
stapling them.
To cancel the PAMPHLET COPY function, select the PAMPHLET
COPY function again and press the "CANCEL" key.
PAMPHLET COPY
) key.
) key indicator lights up, and then press
) key. Repeat this step until all originals
3-19
Advertisement
Table of Contents
