Connecting Peripheral Equipment - Sharp PN-455 Operation Manual

Connecting Peripheral Equipment

The various terminals on the LCD panel are described below.
INPUT1 (PC DIGITAL)
• Connect with the digital RGB output terminal on your computer using a digital signal cable (commer-
cially available).
* Connection with computers that have an output terminal (DVI-D 24 pin or DVI-I 29 pin) conforming to DVI is
possible. (However, images may not display properly depending on the computer.)
• Connect with an audio output jack on your computer using a PC audio cable (commercially avail-
able).
Output terminals on
connected equipment
Audio Digital RGB
* See page 56 for compatible signals.
Digital signal cable
PC audio cable
▼ Rear view
PC digital
RGB input terminal
INPUT1
(DVI)
PC audio input
terminal
PC AUDIO
IN
13
E