Connecting External Speakers - Sharp PN-455 Operation Manual

Connecting External Speakers

Be sure to use external speakers with an impedance of 6 ohms and a rated input of at least 10 W.
▼ Rear view
Black
Red
Red
SPEAKER
R L
External speaker terminals (right) External speaker terminals (left)
Connecting the speaker cables
1. While pushing the tab, insert the tip of the cable.
2. Release the tab.
2.
1.
Make sure to connect the speaker jack and cable polarity ( , ) properly.
The speaker jacks have plus and minus polarity. Plus is red and minus is black.
The speaker cables are also divided into plus and minus.
When connecting the left/right speakers, be sure to connect the plus/minus jacks with the correct cables.
18
E