Advertisement
and the red light will be continuous. Hot or cold bat-
teries may take longer to charge.
Battery Pack
Red Charger
Temperature
Indicator Light
Too Hot / Too Cold
Flashing
Normal Range
Continuous
Powering the Charger with an Inverter
or Generator
The charger will operate with most generators and
inverters rated at 350 Watts or higher.
Maintenance and Storage
Store your charger in a cool, dry place.
As a general practice, it is best to unplug battery
chargers and remove batteries when not in use.
No battery pack damage will occur, however, if the
charger and battery pack are left plugged in.
To reduce the risk of injury, always
WARNING
unplug the charger and remove the
battery pack from the charger before performing
any maintenance. Never disassemble the battery
pack or charger. Contact a MILWAUKEE service
facility for ALL repairs.
To reduce the risk of injury and damage, never
immerse your battery pack or charger in liquid
or allow a liquid to flow inside them.
Cleaning
Clean out dust and debris from charger vents and
electrical contacts by blowing with compressed air.
Use only mild soap and a damp cloth to clean the
battery pack and charger, keeping away from all elec-
trical contacts. Certain cleaning agents and solvents
are harmful to plastics and other insulated parts.
Some of these include gasoline, turpentine, lacquer
thinner, paint thinner, chlorinated cleaning solvents,
ammonia and household detergents containing am-
monia. Never use flammable or combustible solvents
around batteries, charger, or tools.
Charging
Status
Not charging
Normal charging
Rely only on high-grade power tools on our virtual shelves.
Advertisement
