Table of Contents
Advertisement
Using the HP 81101A
The Output Screen
N O T E
The leading and trailing edges are independently programmable within
certain ranges only, see "Transition Times" in the Reference Guide.
N O T E
You cannot have the width format set to D
edge format set to percentage of width (L
time.
Pulse Trailing Edge Parameter
Set the trailing edge transition-time of the pulse, measured from 10% to
90% of the pulse amplitude. There are three formats available:
• =L
• T
• T
N O T E
The leading and trailing edges are independently programmable within
certain ranges only, see "Transition Times" in the Reference Guide.
N O T E
You cannot have the width format set to D
edge format set to percentage of width (L
time.
60
E (select =L
EAD
EAD
The trailing edge transition time is coupled directly to the leading
edge to maintain a symmetrical pulse.
E (select A
RAI
BSOLUTE
The absolute transition time measured from 90% to 10% of the pulse
amplitude. In this format the trailing edge is independent of the
leading edge and the pulse width.
E% (select %
RAI
OF
The trailing edge transition time expressed as a percentage of the
pulse width. In this format, if you adjust the pulse width, the
transition time is adjusted to maintain the edge time as a percentage
of the width.
TY
EAD
E)
)
W
)
ID
TY
EAD
C
and the leading/trailing-
YC
E%/T
E%) at the same
RAI
C
and the leading/trailing
YC
E%/T
E%) at the same
RAI
Advertisement
Table of Contents
