Grinding Flywheel - Van Norman FG5000 Instruction Manual And Parts List

MANUAL MACHINES:
Feed grinding wheel downward by turning feed handle clockwise (Figure 22). Grind
surface until flat and free of defects or to desired depth.
POWERHEAD MACHINES
1. Power the grinding head down to the workpiece using the power column up/down
switch (as a safety feature, the power column will not function if the grinder motor
is running).
2. Start table, grinder head motor, and coolant flow.
3. Rotate the fine feed handknob clockwise (Figure 23) to lower grinder head until
stone contact is made. (if machine is equipped with the auto grind feature, proceed
to step 4) Continue to feed grinder head down to grind surface until flat and free of
defects or to desired depth.
Van Norman

GRINDING FLYWHEEL

5000/10000 FLYWHEEL GRINDER
28. 888-855-1789