Table of Contents
Advertisement
Quick Links
Trip Blade
TB2596 & TB25108
26891
Table of Contents
Read the Operator's Manual entirely. When you
!
see this symbol, the subsequent instructions and
warnings are serious - follow without exception.
Your life and the lives of others depend on it!
Cover photo may show optional equipment
not supplied with standard unit.
© Copyright 2014
301-291M
Operator's Manual
11/26/14
Printed
Advertisement
Table of Contents
Related Manuals for Land Pride TB2596
Summary of Contents for Land Pride TB2596
- Page 1 Table of Contents Trip Blade TB2596 & TB25108 26891 301-291M Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit.
-
Page 2: Table Of Contents
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. -
Page 3: Tb2596 & Tb25108 Trip Blade 301-291M
Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. 11/26/14 TB2596 & TB25108 Trip Blade 301-291M... - Page 4 Wait for all components to come to before working on it. a complete stop before leaving the operator’s seat. Detach and store implement in an area where children normally do not play. Secure implement using blocks and supports. TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 5 Not using the seat belt can result in serious injury or death. Wearing protective equipment such as safety shoes, safety glasses, hard hat, and ear plugs is highly recommended. 11/26/14 TB2596 & TB25108 Trip Blade 301-291M...
- Page 6 Spray soapy water on the surface where the label is to all damaged or missing labels. Order new labels from your be placed. nearest Land Pride dealer. To find your nearest dealer, Peel backing from label. Press firmly onto the surface. visit our dealer locator at www.landpride.com.
- Page 7 Table of Contents Important Safety Information 838-614C 2" x 9" Red Reflector (2 places) 26892 838-615C 2" x 9" Amber Reflector (1 place) 26894 838-112C 26892 Danger: Pinching Hazard 11/26/14 TB2596 & TB25108 Trip Blade 301-291M...
- Page 8 Table of Contents Important Safety Information 848-374C Caution: Transport & Storage Hazard 26893 838-293C Warning: Read Manual 26893 818-831C Warning: High Pressure 26893 TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 9 Your Land The TB2596 and TB25108 front mounted Trip Edge Pride dealer has trained personnel, repair parts, and Blades are designed and built by Land Pride to meet the equipment needed to service the implement. needs of landscapers, construction companies, farmers,...
-
Page 10: Torque Requirements
Page 4 located and legible. Replace if damaged. 26896 Make sure all red and amber reflectors are correctly located and visible when machine is Page 5 Hitch Assembly in transport position. Figure 1-1 TB2596 & TB25108 Trip Blade 301-291M 11/26/14... -
Page 11: Hydraulic Cylinder & Hose Assembly
(#7) and tighten. CAUTION 11. Attach female quick coupling (#9) to fitting Do not stand between the tractor/skid steer loader and (#5 or #11) on hose (#6) and tighten. implement during hook-up. 11/26/14 TB2596 & TB25108 Trip Blade 301-291M... -
Page 12: Hose Hook-Up
Path shown may not be the most convenient. c. Tighten fitting (#4) when all trapped air is 2. Clean quick connect couplers of dirt and then removed. connect male (#1) and female (#2) couplers to the TB2596 & TB25108 Trip Blade 301-291M 11/26/14... -
Page 13: Section 2: Optional Equipment Set-Up
3. Repeat steps 1 and 2 for the right side. Steel And Poly Blades Refer to Figure 2-2: Land Pride offers two types of cutting blades (#1) (steel & 26901 poly) for the Trip Edge Blade. Use the steel blade for... -
Page 14: Section 3: Adjustments
CAUTION Compressing the springs to a value less than 12 11/16" will reduce Trip Blade angle and increase stored energy in the trip mechanism which can cause personal injury. TB2596 & TB25108 Trip Blade 301-291M 11/26/14... -
Page 15: Section 4: Operating Procedures
Move snow during Pivot Control Pin 26919 low-traffic hours. • Trip Blade Stepping Pads Make sure all safety labels are in their proper location Figure 4-1 and in good readable condition before operating. 11/26/14 TB2596 & TB25108 Trip Blade 301-291M... -
Page 16: Pre-Operation Inspection
Switch male and female couplers on the hydraulic hoses 2. Remove hairpin cotter (#2). if lever action is opposite of what is preferred. 3. Pull pivot control pin (#1) out 1" and then reinsert hairpin cotter (#2). TB2596 & TB25108 Trip Blade 301-291M 11/26/14... -
Page 17: Transporting
• proper authorities. Never pile snow on someone else’s property, streets, or sidewalks. d. Identify tight areas that will be hard to turn around in and make a plan for clearing such areas. 11/26/14 TB2596 & TB25108 Trip Blade 301-291M... -
Page 18: Pushing Light Aggregate Materials
26908 silage. Its trip-edge design provides improved protection Trip Edge Blade Hitch Plate against blade damage when unexpected ground Figure 4-3 obstacles are encountered. TB2596 & TB25108 Trip Blade 301-291M 11/26/14... -
Page 19: General Operating Instructions
Once you have familiarized yourself with the Operator’s Manual, completed the operations checklist, and properly attached your Land Pride TB2596 or TB25108 Trip Edge Blade to your tractor loader or skid steer loader, you are now almost ready to begin work. The... - Page 20 10. Return to the tractor/skid steer. Raise unit up and 3. Place transmission in park and set park brake. remove support blocks. 26900 Steel Blade Removal and Assembly Figure 5-1 TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 21 10. Return to the tractor/skid steer. Raise unit up and and retaining plate to ground. remove support blocks. 5. Inspect RHSN bolts (#2) and nuts (#3) for wear. Replace as needed. 26977 Poly Blade Removal and Assembly Figure 5-2 11/26/14 TB2596 & TB25108 Trip Blade 301-291M...
- Page 22 9. Raise blade up and remove support blocks. 3. Place transmission in park and set park brake. 4. Shut tractor/skid steer off, remove switch key, and relieve all hydraulic pressure before dismounting. TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 23 3. Repaint parts where paint is worn or scratched to spraying. prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up Try resetting the blade by lowering it to the ground and bottles with brush, quarts, and gallon sizes by adding backing up with the tractor/skid steer.
- Page 24 Type of Lubrication: Lithium based spray lubricant Quantity = As required 26895 Required Blade hinge Front and Back at each trip hinge joint. Type of Lubrication: White Lithium spray lubricant Quantity = As required 26895 TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 25 Trip Release Pressure 700 lbs Skid Steer/Tractor Horsepower 30 to 80 HP blade blade Steel = 657 lbs. Steel = 684 lbs. Equipment Weight blade blade Poly = 596 lbs. Poly = 616 lbs. 26928 11/26/14 TB2596 & TB25108 Trip Blade 301-291M...
- Page 26 Provides operator with improved awareness and visibility of outermost edges of the blade Optional Blade Marker bottom to prevent unwanted contact with ground obstacles. Optional Top Mounted Helps prevent snow from over-topping the moldboard in deeper snow conditions. Rubber Deflector TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 27 Hydraulic hoses are hooked-up wrong. hoses and reconnect to the power direction expected equipment. Power equipment arms are not set in Low areas do not clean-up well Set power equipment arms to float mode. float mode. 11/26/14 TB2596 & TB25108 Trip Blade 301-291M...
- Page 28 = nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. TB2596 & TB25108 Trip Blade 301-291M 11/26/14...
- Page 29 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
- Page 30 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...