Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 6/19/23...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Parts Manual for this link you to available dealers equipment. Download the appropriate for Land Pride products. App on your smart phone, open the App, Refer to Parts Manual QR point your phone on the QR code and Locator on this page for take a picture.
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a potential hazard assurance against an accident.
Page 6
Replace parts on this implement using the correct tools and follow all shutdown procedures equipment. with genuine Land Pride parts only. before leaving the operator’s seat to Do not alter this implement in a way Always properly match the wheel perform maintenance.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Never carry riders on the tractor or A slow moving power machine structures (ROPS) and seat belt implement.
Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid Crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (Quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 6/19/23...
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Page 11
1 Place: On front right-hand side of rake frame 70247 78830 858-148C Warning: Pinch Point Hazard 3 Places: Two on right-hand side of hitch frame and one on left-hand side of hitch frame 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Page 12
1 Place: On shaft cover (Only on hydraulic angling bundle) 78828 70375 30370 818-552C Danger: Rotating Driveline - Keep Away 2 Places: One on hex shaft cover and one on driveline outer shield PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Page 13
Danger: Guard Missing Hazard - Do not Operate 1 Place: On hex drive shaft under shaft guard 78828 70382 818-130C Warning: Operate only with 540 rpm Power Take-off Speed 1 Place: On hitch frame 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Table of Contents Introduction Introduction Serial Number Land Pride welcomes you to the growing family of new product owners. This Powered Rake has been designed For quick reference and prompt service, record model with care and built by skilled workers using quality and serial number on the inside cover page and again on materials.
To speed up the assembly task and to make the job safer, before leaving the operator’s seat. have all needed parts and equipment readily at hand. Use steps, grab-handles and anti-slip surfaces when stepping on and off the tractor. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Page 16
(#2) and nut (#1). 5. Tighten nut (#1) to 25-30 ft-lb (34-41 Nm) torque. 6. Push/pull on driveline to ensure it is securely fastened to the gearbox input shaft. Close driveline cover access door. PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Page 17
6. Move stand (#5) to operating position. Refer to “Stand Adjustments” on page 22 if needed. NOTE: Land Pride’s Quick Hitch can be attached to the tractor to provide quick and easy 3-point connect and disconnect. See your nearest Land Pride dealer to purchase a Quick-Hitch.
Page 18
Powered Rake does not angle in the direction periods of inactivity. For detailed instructions, see desired. “Slip Clutch Maintenance” on page 24. 5. Continue with “Check Driveline Collapsible Length” on page 15. PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Figure 1-3. Measure dimension “A” . • If “A” is less than 1", continue with step 8. • If “A” is greater than or equal to 1", skip to “Check Driveline Maximum Length” on page 16. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Start tractor and drive forward enough to clear the support blocks. 8. Lower implement to the ground and shut tractor down using “Tractor Shutdown Procedure” on page 11. Maximum Allowable Driveline Movement Figure 1-6 PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Page 21
12. Support collapsed driveline off the ground to keep parking Powered Rake for a long period. dirt away from yoke push pin, u-joint, and splines. 2. Shut down tractor. Refer to “Tractor Shutdown Procedure” on page 11. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Consult your tractor Operator’s Manual to determine weight requirements and maximum limitations. • Always follow “Tractor Shutdown Procedure” provided in this manual before dismounting the tractor. PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Page 23
When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely. 4. Shift tractor to a lower gear when traveling over rough or hilly terrain. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Page 24
The material control deflector sifts out clods, rocks, site, perform operational safety checks, and make final adjustments before using your Land Pride Powered and other debris as the soil passes over the top of the Rake.
Page 25
Lengthen the center 3-point link to raise front of rake. b. Shorten the center 3-point link to raise rear of rake. 4. Once rake is level, continue with “Gauge Wheel Depth Adjustment” on this page. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Page 26
(A) with hole in stand tube and replace pin (#1). • For operating: Move stand (#2) to align hole (B) with hole in stand tube and replace pin (#1). Stand Adjustments Figure 3-5 PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
(#2) on rake frame while also aligning hinge tube (#3) with storage tab (#4). 3. Reinstall linchpin (#1) over wing and through hole in mounting tab. Wing Stored Position (LH Side) Figure 3-8 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Check all hardware after several hours of operation and regularly thereafter to ensure they are tight and secured. Replace worn, damaged, or illegible safety labels by obtaining new labels from your Land Pride dealer. Hold this wrench stationary while turning the above wrench...
Page 29
8. Place springs (#2) over each bolt (#3) and secure Figure 4-3 with nuts (#1). Refer to Figure 4-3: 9. Progressively tighten each spring retainer nut until correct compressed spring length “A” is reached. • A = 1.08" (27 mm). 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
14. Remove vented fill plug (#13) and oil level plug (#6). Fill chaincase with recommended lubrication. Refer to “Chaincase Lubricant” on page 29. 15. Reinstall and tighten vented fill plug (#13) and oil level plug (#6). Torque plugs to 25 ft-lbs (33.9 Nm). PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Replace damaged and worn parts as needed. • Make required adjustments. 4. Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Land Pride aerosol Skid Shoe Replacement touch-up paint. Paint is also available in touch-up Figure 4-5 bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.
Gauge Wheel Axle 2 - Zerks: One grease zerk for each gauge wheel Type of Lubrication: Multi-Purpose Grease Quantity: Add grease until grease begins to emerge from either side of the axle hub. PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Page 33
Quantity: With gearbox level, check oil by removing level plug from backside. If oil level is low remove top breather plug and fill with lube until it flows from level plug hole. Do not overfill. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
Driveline Profiles Disconnect driveline from tractor and pull driveline halves apart. Clean and coat the inner profile tube with a film of grease and then reassemble. Type of Lubrication: Multi-Purpose Grease Quantity: Coat generously PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact, they can easily be replaced. 3 Year gearbox warranty Shows our confidence in the gearbox integrity. Quick Hitch compatible Makes for faster and easier connecting to tractor. (May need extra driveline). PR1048 & PR1060 Powered Rakes 314-299M 6/19/23...
Roller balling up with soil Wait until soil dries. Powered Rake bouncing on ground Clean roller. Increase roller speed if roller is turning slow. Decrease roller speed if roller is turning fast. 6/19/23 PR1048 & PR1060 Powered Rakes 314-299M...
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items such as blades, belts, tines, etc. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.