Selecting The Audio Playback Mode - Sharp Viewcam VL-Z1U Operation Manual

Selecting the Audio
Playback Mode
You can select any of the following audio
playback modes.
Audio 1H2
• 12-bit recording in mono (Audio 1
and Audio 2 channels)
• 16-bit recording in mono
Audio 1
• 12-bit recording in mono (Audio 1
channel only)
• 16-bit recording in mono
Audio 2
• 12-bit recording in mono (Audio 2
channel only)
• 16-bit recording in mono
Note:
• This camcorder can output stereo sound
when a tape is recorded in stereo.
1
Playback a Mini DV cassette with
dubbed audio.
2
Press the DISPLAY button until the
mode screen appears.
3
Select "MENU", then "EXECUTE" by
using the Operation button (see page
28).
4
Press l or m to select V, then
press the center of the Operation
button.
5
Press l or m to select "AUDIO",
then press the center of the Operation
button.
P L A Y B A C K S E T
R O T A T E P B
A U D I O
R E T U RN
6
Press l or m to select the desired
audio playback mode, then press the
center of the Operation button.
AUD I O
7
Press the DISPLAY button to turn off
the menu screen.
• The selected audio playback mode
indicator only appears when the on-
screen indicators are turned on.
1 +
AUDIO 2
Audio playback mode indicator
Note:
• The audio playback mode indicator,
"AUDIO", displays in different colors
depending on the recording mode (12- or 16-
bit) used for the recording being played
back. A white display indicates 12-bit
recording mode, while a green indicates 16-
bit.
+ 2
1
1
2
+
1 2
59