User Guide And Operating Instructions - Seating Matters MONACO Operation Manual & Product Specification

USER GUIDE AND
OPERATING INSTRUCTIONS
A competent person, trained in the use of the chair, should make adjustments and set
it up according to the User requirements and Patient dimensions before the Patient
sits in the chair. Ensure there is more than one competent person present when making
adjustments to ensure they are correct and safe. Ensure all fixings are secure before
allowing the person to sit in the chair, this includes lateral supports, seat adjustment
and footplate. Please call your Seating Matters provider if you have any questions on
these points. This product should not be lifted at any time unless by competent persons
trained in such manual handling.
• Braking Castors:
The MONACO™/MONACO ASSIST™
must be used on a plane, hard surface
with the brakes engaged to ensure
stability and to avoid the device moving
undesirably during use. Braking castors,
where provided, must be in the braked
position while in use (fig.1).
• Back angle adjustment:
MONACO™
To recline the back of the chair,
the user must inform the Patient then
stand behind the chair, and with two
hands, firmly hold the push handle while
closing the release lever (fig.2). Move the
back of the chair slowly until it is in the
required position and allow the release
lever to move to its relaxed position
before letting go of the push handles.
MONACO ASSIST™
Adjustments are performed according to
the buttons on the handset. (See page 10) Exercise care in case of injury to the
Patient or damage to the surrounding environment.
6
(fig.1)
(fig.2)
www.seatingmatters.com