Connecting To The Video Jack; Video Connections - Sharp 10P03-CH-NG Operation Manual

Video Connections

Connecting to the Video Jack

You can enjoy the images through the video jack.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an AV cable (supplied) to the video jacks (1 and 2).
2
(Yellow)
1
To VIDEO output jack
AV cable (supplied)
2
To VIDEO input jack
Projector
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 18)
• If necessary, perform the Audio Video Settings. (Pages 49–50)
This Player
Yellow
(Yellow)
Yellow
TV
Video equipment with a video jack
Connect directly
Blu-ray Disc
Player
NOTE
• Connect the Blu-ray disc player to LCD TV
directly. If you play back the image via VCR,
the image may deteriorate due to the copy
guard function.
• When you record the program where
copyright is protected, the copy guard
function is activated automatically; the
program cannot be recorded correctly.
Also, the playback image via VCR may
deteriorate due to this function. However,
this is not a malfunction. When you watch
the program where copyright is protected,
we recommend that the Blu-ray disc player
be connected to LCD TV directly.
AV receiver
VCR
LCD TV
17