Turning The Power On; Entering Standby; Indicators On The Player - Sharp 10P03-CH-NG Operation Manual

Before Starting Playback

Turning the Power On

POWER
AQUOS PURE MODE indicator
POWER (ON/STANDBY) indicator
Turning the power on
Press POWER on the remote control or on the Player
to turn on the power of the Player.
NOTE
• When you turn on this player for the first time after
purchase or when you turn on this player after you perform
"System Reset" (see page 52), the language setting screen
will be displayed, so please perform the language setting
(see step 4 of page 23).
22
OPEN/CLOSE
BD/DVD/CD mode indicator

Entering standby

Press POWER on the remote control or on the Player
to enter standby.
• If you press POWER again immediately after entering
standby, the Player may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
• When the POWER indicator is blinking (may take some
time), the Player cannot be turned on.

Indicators on the Player

POWER (ON/STANDBY) indicator
Green on
Red blinks
Red on
AQUOS PURE MODE indicator
Green on
BD/DVD/CD mode indicator
Blue on
Blue blinks
Power on
Preparing for standby
Standby
Output in AQUOS PURE
MODE (See page 24.)
Playing back
Loading a disc