SETTINGS
7
Press a/b to select "desired access point" or
"Other Network", then press ENTER.
•
For access points which are set to hide the SSID
using the wireless router, select "Other Network" to
set the access point.
Select the access point.
XXXXXXXXXXXX
YYYYYYYYYYYY
Other Network
•
If selecting "desired access point", go to step 10.
•
If selecting "Other Network", go to the next step.
8
Press ENTER, then enter the access point
name.
•
The access point name is manually entered using the
screen for inputting characters. (See page 56.)
Enter the access point name.
Access Point:
9
Select "Next", then press ENTER.
10
Press a/b to select your appropriate security
key, then press ENTER.
•
When selecting WPA/WPA2, selectable security keys
are PSK/TKIP and PSK/AES.
Select the security key.
WPA-PSK(AES)
WPA-PSK(TKIP)
WPA2-PSK(AES)
WPA2-PSK(TKIP)
11
Press ENTER, then enter the security key code.
•
Enter the exact same security key which has been set
in the wireless router.
•
The security key code is manually entered using the
screen for inputting characters. (See page 56.)
Enter the security key.
Security key:
Next
OPEN
WEP
Next
12
Select "Next", then press ENTER.
13
For testing after confirming the settings, select
"Test", then press ENTER.
•
If the test has failed, an error message appears.
Retry to perform the settings after checking that the
connection (page 20) is performed properly.
Confirm your setting.
Access Point:
XXXXXXXXXXXX
Security key:
XXXXXXXXXXXX
14
Follow steps 6–11 and 13–14 of "When selecting
Cable" on pages 53–54 to complete the network
connection settings.
NOTE
•
Regarding access point(s) which have been set, the
settings are maintained even if the wireless LAN adapter is
removed.
Information on MAC addresses
A MAC address is a unique ID number for network
equipment. A MAC address is necessary for MAC
address filtering on the wireless router/access
point.
Before the wireless communication setup is
performed, we recommend writing down the MAC
address of the connected wireless LAN adapter
and keeping it in a safe place. The MAC address is
labeled on the adapter. (The MAC address is also
displayed on the "Current Ethernet setup info."
screen when wireless communication is set (See
step 5 of page 54).)
MAC address
Test
55